Home > Ideas > Delicate Designer Component Design Ideas > Bermuda Dream Swarovski Designer Component Necklace

Bermuda Dream Swarovski Designer Component Necklace

Want to make this Design Idea?

You can quickly add all the required items by clicking the SELECT ALL button below, ENTERING required quantities like # of INCHES of Leather, UNCHECKING any unwanted items. Then go to bottom of page and click ADD TO CART.

Supply List:

  • 1 Swarovski 6730 34mm Radiolarian Pendant - Crystal Bermuda Blue
  • 1 46mm Open Bubble Pendant / Link - Satin Hamilton Gold
  • 32 inches 1mm Round Leather Cord - Purple
  • 14 inches Chain Rolo 2mm - Satin Hamilton Gold
  • 6 inches Chain Rolo Petite Double 2mm - Satin Hamilton Gold
  • 3 Jump Ring 3mm 22g - Satin Hamilton Gold
  • 3 Jump Ring 4mm 21g - Satin Hamilton Gold
  • 1 Jump Ring 6mm 21g - Satin Hamilton Gold
  • 1 Jump Ring 8mm 18g - Satin Hamilton Gold
  • 1 inch Wire - 24 Gauge - Non-Tarnish Gold
  • 2 TierraCast Cord End Cap Pagoda 2mm - Gold Plated
  • 1 TierraCast Clasp Lobster 12mm - Gold Plated
  • Super New Glue®

    Finished Length: 16 inches

    Time To Finish: Under 2 Hours

    Level of Difficulty: Intermediate

    Tools: Chain Nose Pliers, Flat Nose Pliers, Flush Cutters

    Helpful Video Tutorial: Click to Watch Jump Rings 101 Basic Techniques for Jewelry Making and How to Tie a Larks head Knot for Jewelry Making

    Designer Tip: Attach the Swarovski focal to the bubble focal as shown. Cut 4 lengths of the 2mm double rolo chain approximately 1 inch in length and two lengths approximately ½ inch on length (These do not have to be exact). Open a 3mm jump ring and add two 1 inch chain sections; close. Repeat with the two other 1 inch and ½ inch chain sections. Add the jump rings with the two longer chain sections and the one with the shorter chain sections to the bubble focal as shown using 4mm jump rings. Cut and attach a 4-link section to the top loop on the other side of the Swarovski focal using another 4mm jump ring. Cut the leather in half. Fold each section in half and attach to the top link of each side of the bubble focal. Cut the rest of the 2mm chain in half and attach a section to the using 4mm jump rings in the middle of each Larks Head knot. Trim each side of the leather to 7 inches and glue into a Tierracast end cap. Trim the chain about 1/8 inch shorter than the leather. Cut the wire in half. Thread one section of wire through the chain and fold in half. Trim to 1/8 inch and glue into the end cap. Repeat on the other side. Attach the clasp to one end cap using a 4mm jump ring; attach the 6mm jump ring to the other end cap. Apply a small amount of glue to the Larks Head knots if needed to hold in place.
  • Sort By:
    Page of 1
    Swarovski 6730 34mm Radiolarian Pendant - Crystal Bermuda Blue
    6733-BB - 34x22mm
    Hole Size: 3mm
    Sold Individually
    Genuine Swarovski Advanced Crystal - partially frosted
    Additonal holes in pendant measure 10.5x5.5mm, 7x4mm, and 8x5.5mm.
    Created in collaboration with designer Celine Cousteau

    Our Price: $22.50
    3 in stock
    Qty Add
    46mm Open Bubble Pendant / Link - Satin Hamilton Gold
    K18-G - 46x32mm
    Hole Size: Varies from 3-5mm
    Sold Individually
    Brass plated with Satin Hamilton Gold

    Our Price: $3.50
    21 in stock
    Qty Add
    Jump Ring 3mm 22g (50) - Satin Hamilton Gold
    JR3-SG - Electro-Plated Base Metal
    Sold Package of 50

    Our Price: $0.95
    13 in stock
    Qty Add
    1mm Round Leather Cord - Purple
    1R-11 - 1mm Round
    Sold by the Yard
    Genuine Leather precision cut from the center of the hide
    Glue ends with super glue designed for leather and metal.

    Our Price: $2.00
    4 in stock
    Qty Add
    TierraCast Clasp Lobster 12mm - Gold Plated
    TC-01-0110-25 - 7x12mm
    Loop Size: 1.25mm
    Sold Individually

    Our Price: $0.60
    45 in stock
    Qty Add
    TierraCast Cord End Cap Pagoda 2mm (2) - Gold Plated
    TC-01-0200-25 - 10x4mm
    Loop Size: 1.25mm Hole Size: 2mm
    Sold as a Pair
    Requires additional clasp to close or use as connector to jump rings or chain

    Our Price: $2.25
    2 in stock
    Qty Add
    Super New Glue for Jewelry Making
    !Super New Glue®
    glue-sn - Recommended for attaching metal clasps to the leather cord.
    Bonds metal, leather, rubber, glass, ceramics, porcelain, and plastic. Non-messy easy applicator bottle. 3 grams per bottle.
    Sold Individually
    Go ahead and order as many as you need
    What we don't have in stock we can get right away

    Our Price: $2.75
    9786 in stock
    Qty Add
    Chain Rolo 2mm - Satin Hamilton Gold
    CH-48-SG - Soldered
    Sold By The Foot

    Our Price: $3.00
    (Out of Stock)
    Qty Add
    Wire - 24 Gauge - Non-Tarnish Gold
    w-24ntg - 10 yard spool
    Tarnish Resistant Enameled Copper Wire

    Our Price: $4.75
    6 in stock
    Qty Add
    Jump Ring 4mm 21g (40) - Satin Hamilton Gold
    JR4-SG - Sold package of 40

    Our Price: $1.75
    37 in stock
    Qty Add
    Jump Ring 6mm 21g (40) - Satin Hamilton Gold
    JR6-SG - Sold package of 40

    Our Price: $1.95
    1 in stock
    Qty Add
    Jump Ring 8mm 18g (20) - Satin Hamilton Gold
    JR8-SG - Sold package of 20

    Our Price: $2.25
    16 in stock
    Qty Add
    To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
       
     
    Close