Home > Clasps > Flat Clasps For Leather and Other Cord > 10mm Flat Leather Cord Glue-In Metal Cuffs

10mm Flat Leather Cord Glue-In Metal Cuffs

Break away from the norm of beaded bracelets with a piece of unique, detailed Regaliz® flat leather from Antelope Beads! The 3 bracelets shown below are a few examples of what unique, eye catching designs are possible. Click here to see more of our Glue-In Cuff Ideas or Click here to Shop all of our 10mm Flat Leather Cords to create your own unique Cuff designs.

Simple Stripes Glue-In Cuff
Persian Flower Glue-In Cuff
Midnight Blingy Glue-In Cuff
Blue Tree Glue-In Cuff
To add items to your cart, fill in the desired quantity, click the "Add" checkbox next to the item. Then click "Add To Cart" at the bottom of the page to add all selected items to your shopping cart.
Sort By:
Page of 1
Super New Glue for Jewelry Making
!Super New Glue®
glue-sn - Recommended for attaching metal clasps to the leather cord.
Bonds metal, leather, rubber, glass, ceramics, porcelain, and plastic. Non-messy easy applicator bottle. 3 grams per bottle.
Sold Individually
Go ahead and order as many as you need
What we don't have in stock we can get right away

Our Price: $2.75
Qty Add
10mm Glue-In Cuff Flat Leather Cord - Antique Silver
10F-CF-1AS - 14.5x3.5mm
Outer Diameter: 6 3/4 inches - start with 7 inch piece of cord and trim
Adjustable - will fit most wrist sizes
Sold Individually - Click on pic for gluing directions
Brass Base Plated with Sterling Silver
Blank Base to glue in 10mm flat cord
Go ahead and order as many as you need
What we don't have in stock we can get right away

Our Price: $10.95
Qty Add
10mm Glue-In Cuff Flat Leather Cord - Gunmetal
10F-CF-1GM - 14.5x3.5mm
Outer Diameter: 6 3/4 inches - start with 7 inch piece of cord and trim
Adjustable - will fit most wrist sizes
Sold Individually - Click on pic for gluing directions
Brass Base Plated with gunmetal color
Blank Base to glue in 10mm flat cord
Go ahead and order as many as you need
What we don't have in stock we can get right away

Our Price: $10.95
Qty Add
10mm Glue-In Cuff Flat Leather Cord - Rhodium Plated
10F-CF-1R - 14.5x3.5mm
Outer Diameter: 6 3/4 inches - start with 7 inch piece of cord and trim
Adjustable - will fit most wrist sizes
Sold Individually - Click on pic for gluing directions
Brass Base Plated with Rhodium
Blank Base to glue in 10mm flat cord
Go ahead and order as many as you need
What we don't have in stock we can get right away

Our Price: $8.75
Qty Add
10mm Glue-In Cuff Flat Leather Cord - Rose Gold
10F-CF-1GP - 14.5x3.5mm
Outer Diameter: 6 3/4 inches - start with 7 inch piece of cord and trim
Sold Individually - Click on pic for gluing directions
Brass Base Plated with rose gold
Blank Base to glue in 10mm flat cord
Go ahead and order as many as you need
What we don't have in stock we can get right away

Our Price: $10.95
Qty Add
10mm Glue-In Cuff Flat Leather Cord - Shiny Gold
10F-CF-1GP - 14.5x3.5mm
Outer Diameter: 6 3/4 inches - start with 7 inch piece of cord and trim
Adjustable - will fit most wrist sizes
Sold Individually - Click on pic for gluing directions
Brass Base Plated with gold
Blank Base to glue in 10mm flat cord
Go ahead and order as many as you need
What we don't have in stock we can get right away

Our Price: $10.95
Qty Add
E6000 Glue .18 oz - Industrial Strength Adhesive
Glue-6000 - .18 oz tube of Craft Glue - only use to hold Sliders in place on Leather
DO NOT USE TO GLUE LEATHER CLASPS - WILL NOT HOLD

Our Price: $1.75
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
   
 

Click here to Shop the 5mm Glue-In Cuffs


Instructions: Each bangle takes one bracelet blank and 6 ˝ inches of 10mm leather. The bracelet blanks have rounded corners and the ends are at a slight angle. Using sharp scissors or flush cutters, trim one end of the leather to fit the bangle. Glue the end in with Super New Glue and use tape or wire to hold the leather in place while drying. Spread a small amount of E-6000 on the bracelet blank starting from the glued portion to about ˝ inch away from the other end. Press leather in place and trim other end to fit in bangle. Apply Super New Glue to the end of bangle and press leather in place, again using tape of wire to hold the leather while the glue is drying. A nail file can be used to smooth the rounded corners if desired. If the Super New Glue does not hold, allow it to dry completely and reapply. The rationale for using the E-6000 everywhere but the ends is that is it bonds with some elasticity and will allow the bangle to be opened and closed without cracking. Super New Glue tends to be a bit more brittle when it is dry, and that is why we don't recommend it for the bendable part of the cuff, but will hold the ends strongly.

Close